Product Overview
Gauge Plate, also known as ground flat stock, is precision ground flat tool steel bar, supplied in the annealed condition so it can be cut, drilled, filed and machined before being hardened. It is the standard material for making press tools, punches, dies, jigs, gauges, templates and wear parts. Our gauge plate is of superb quality, manufactured only from UK and European raw materials, and is made from O1 Tool Steel (WN 1.2510 / A.I.S.I. O1). This plate is 1mm thick, 75mm wide and 500mm long.
Features
- Length: 500mm
- Width: 75mm
- Thickness: 1mm
- Quality: WN 1.2510 / A.I.S.I. O1
- Material: O1 Tool Steel
- Finish: Natural
Why O1 Tool Steel?
O1 (WN 1.2510) is an oil hardening, non-shrinking cold work tool steel, alloyed with manganese, chromium and tungsten. It is supplied annealed and ground to close tolerances on thickness and width, so it is easy to machine and ready to mark out without further surface preparation. After hardening and tempering it gives a hard, wear-resistant edge with very little distortion, which makes it ideal for accurate tooling. It has been annealed for excellent ductility and workability.
Typical Uses
1mm gauge plate like this is commonly used for shims, templates, feeler and setting gauges, small punches, knife blades and springs, in tool rooms, toolmaking, engineering workshops and model engineering, where an accurate, hardenable tool steel is needed.
Our Gauge Plate Range
At GWR Fasteners we stock O1 tool steel gauge plate in thicknesses from 1mm to 50mm and widths from 10mm to 300mm, in 100mm, 250mm and 500mm lengths.
This 1mm thick plate is available in 17 widths, from 10mm to 300mm.
Frequently Asked Questions
Is gauge plate supplied hardened?
No. It is supplied in the annealed (soft) condition so it can be cut, drilled, filed and machined. It is hardened after the part has been made.
How do you harden O1 gauge plate?
Heat slowly and evenly to 790 - 820°C, hold until the temperature is uniform, then quench in oil. Temper straight away, before the part cools fully, at 150 - 250°C for at least 1 hour, depending on the final hardness required. As quenched it reaches around 63 - 65 HRC, which tempering reduces to the working hardness.
What is the difference between gauge plate and flat bar?
Gauge plate is a hardenable O1 tool steel, precision ground to close tolerances on thickness and width. Bright mild steel flat bar is cheaper and easier to weld, but it cannot be through-hardened and is not ground to the same accuracy.
Can you cut gauge plate to a custom size?
Yes. We offer a custom cutting service, so you can order the exact size you need without any waste. Please contact our sales team for a quote.
What does WN 1.2510 / AISI O1 mean?
They are the German (Werkstoff) and American (AISI) designations for the same oil hardening tool steel. Gauge plate to either designation is the same material.